ACCUZONE MAXICOOL AZ08EWB Guia Del Usuario página 9

1. Cut Foam Seal A and B strips to the proper lengths and remove the adhesive backing. Attach
them to the window sash and frame as shown.
2. Insert the Window Slider assembly into the window opening.
3. Cut the non-adhesive Foam Seal C strip to match the width of the window. Insert the seal
between the glass and the window frame to prevent air and insects from getting into the room.
4. If desired, install the optional security bracket with 2 screws as shown.
5. Insert the tube Window Slider Adapter into the hole of the Window Slider.
1
Foam seal B
Foam seal A
Foam seal B
3
Installation 2
Foam seal C
OPTIONAL
Window
2
4
7
Method 2:
Hung Window
Installation