Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
WIRE CONNECTIONS
INSTALLATION OF DAB ANTENNA
For this operation, contact a professional installer.
1.
The DAB antenna supplied requires installation on the front windscreen in a vertical position (see figure).
2.
Clean the glass where you want to attach the antenna.
3.
Carefully remove the protective film from the adhesive on the antenna and place it in the chosen location. The antenna
must be positioned so that the ground contact can be spread on the metal body of the car (it is not necessary to
remove the paint).
4.
Position the cable (length 3 m) inside the car dashboard until you reach the position of the radio. Connect the cable
with golden connector to the DAB antenna input on the rear of the car radio and secure it by screwing the connector.
If a second thinner black cable is present, it must be connected to the main power supply + 12V (key).
Caution:
-
Do not install the antenna in a position that obstructs the driver's view.
-
Do not place the cable and the antenna where they could interfere with the proper functioning of the
AirBag or other safety devices or where they could impede the driving of the vehicle.
-
The use on shielded glass reduces the antenna performance.
A
POWER SUPPLY
1.
Free
2.
Free
3.
Free
4.
Memory (permanent sup-
ply)
5.
Auto antenna OUTPUT
6.
Free
7.
Main supply (positive)
8.
Ground (negative)
Antenna DAB
14
SCD 5753 DAB
B
SPEAKERS
1.
+ Rear right
2.
- Rear right
3.
+ Front right
4.
- Front right
5.
+ Front left
6.
- Front left
7.
+ Rear left
8.
- Rear left
Publicidad
