DEXIS 14014550 Manual Del Usuario página 39

Appendix
B
The DEXIS sensor is, like any electronic medical device, subject to electromagnetic
interactions with other electronic devices. The information in this chapter addresses
this issue.
The EMC information in this chapter is provided for the medical system established
by connecting the DEXIS sensor to a computer. This computer must be compliant
with IEC 60950-1 (if located outside the patient environment) or IEC 60601-1 (if
located inside the patient environment). Please consult the documentation of the
computer for complete EMC information.
The DEXIS sensor is suitable for use in hospitals except for near active HF surgical
equipment and the RF shielded room of an ME system for magnetic resonance
imaging, where the intensity of EM disturbance is high.
Important: Portable/mobile radio frequency communications equipment can affect
the function of the DEXIS sensor as well as any other electronic
medical equipment. This affect may result in Image failure or image
quality degradation.
DEXIS is a USB compliant device and shall be used with USB
compliant cables suitable for high speed/USB 2.0 cables. Such cables
are either marked "USB 2.0" or "USB high speed." USB certified hubs
can be used to extend the distance to the USB host/computer. The
length of the cable connection to the hub or between hubs shall not
exceed 5 m.
DEXIS Sensor is a USB compliant device and shall be used with USB compliant
cables suitable for high speed/USB 2.0 cables. Such cables are either marked "USB
2.0" or "USB high speed." USB certified hubs can be used to extend the distance to
the USB host/computer. The length of the cable connection to the hub or between
hubs shall not exceed 5 m.
WARNING
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment could
result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper
operation.
English
EMC Information
B-1