STAR Water Systems SPCP02 Manual Del Usuario página 5

3. For best stability, attach garden hose to lower
discharge. 1-1/4" top discharge may be used
with proper support of discharge line and pump.
If using garden hose (not included), thread the
female end of the garden hose into the male
end near the bottom of the pump. DO NOT
OVER-TIGHTEN THE HOSE. Finger tight plus
1/4 to 1/2 turn should be sufficient.
For best performance, unwind the hose before
starting the pump.
4. Place pump in an upright position on the pool
cover where water will collect. Do not suspend
pump by the discharge hose or power cord.
Be sure pump is not sitting in mud, sand, or
debris.
5. Plug the pump into a properly grounded, ground
fault circuit interruptor (GFCI) 115 V outlet. For
safety, the pump should always be electrically
grounded to a suitable electrical ground, such
as a grounded water pipe, properly grounded
metallic raceway, or ground wire system.
3
4
5
5