TruVision TVN 12 Guia De Inicio Rapido página 4

Default IP address - 192.168.1.82
Figure 2: Front panel
Name
. Power
1
2. HDD
3. Tx/Rx
4. USB interface
Figure 3: Live view quick access toolbar
1. Multiview display: Select a multiview display
format.
2. Stream type: Select main stream or substream
3. Start bidirectional audio
4. QR code: Scan the code to facilitate adding the
recorder to a mobile app.
5. Stop/start all live view: Freeze/unfreeze live
image of the cameras displayed.
6. Capture: Capture a snapshot of a video image
from the selected camera.
2 -EN
Description
A steady green light indicates the recorder is working correctly. Red indicates a
fault.
Light blinks red when data is being read from or written to the HDD. A steady red
light indicates an HDD exception or error.
Steady green indicates a normal network connection. No light indicates that it is
not connected to a network.
Universal Serial Bus (USB) port for additional devices such as a USB mouse or
USB Hard Disk Drive (HDD).
Download the latest recorder firmware and TruVision
Navigator software from
www.firesecurityproducts.com
7. Start/stop all recording: Start/stop recording for
all cameras.
8. Digital Zoom: Enter digital zoom mode.
9. Previous screen: Display the previous camera.
10. Next screen: Display the next camera.
11. Mute: Enable/disable audio output.
12. Alarm output:
13. Full screen: Display the video tiles in full screen
mode. Click ESC to return to normal mode.
TVN 12 Quick Start Guide