Livoo AR321 Manual De Instrucciones página 8

Use the supplied USB cable to connect the alarm clock to a compatible power source. Use an AC
adapter( not supplied) to connect the cable to a power outlet.
When the product is used with batteries only, the functions are limited:
- the time display will turn off after 5 seconds. Press any key to display the time.
- At the alarm time, the alarm will sound for 2 minutes. The Snooze function is available. Press any key
except Snooze to stop the alarm.
- radio is available
- not all light functions are available in battery mode.
Note: The time display is not shown when the radio is on. When the radio is on, you will see the frequency
of the radio station being transmitted. You must press the FM button to display the time and then press
the FM button again to continue listening to the radio.
Setting the time
When the socket is plugged in, the time indication flashes.
Use the keys to set the hours and minutes and confirm with the key
If the indication has stopped, press the key
12h-24h format
Press the button
Changing the current time
Press the key : the time indication will flash.
Use the keys to set the hours and minutes and confirm with the key
stopped, press the same key again.
Time display intensity
Press the button
high)
FM radio
Press the button to turn the radio on and off.
Press and hold the button
automatically.
Press the buttons
Press the button
not displayed when the radio is on.
Setting the alarm
Press the button
the time display.
Press and hold for 3 seconds to set the alarm. The time is shown flashing.
Setting the hour: use the keys
Setting the minutes: use the keys
press the key again.
Nature sounds
on the back of the product. 12H: AM and PM will appear on the time display.
on the back of the product to turn off or adjust the intensity of the display (low,
for 3 seconds. All available FM stations will be searched and saved
to select an FM station.
on the back of the product to select the volume level (from 1 to 15). Note: The time is
to turn the alarm mode on and off. The symbol
and confirm with the key.
and confirm with the key. If the display has stopped flashing,
again
6
. If the indication has
appears and disappears on