Crosby IP IPTK Manual Del Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP lifting clamps are the most reliable lifting clamps available. But using reliable tools does
not automatically mean that practices are reliable. The people who work with clamps play an
equally important role in reliable lifting. Ensure that everyone who works with CrosbyIP lifting
clamps has been instructed in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP lifting clamps in optimum
condition and keep warranty, regular maintenance is important. Preventive maintenance and repair
shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty pro-
gramme and for more details on maintenance procedures, please consult www.thecrosbygroup.
com/resources/crosbyip-10-year-guarantee for more information.
It is not
permitted to stay
Please read and understand these instructions before using the lifting clamp.
in the danger
zone of the load.
2. Safety precautions
No changes may
be made to
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
CrosbyIP
reliability in the working environment.
clamps. Never
„ IPTK(W) - IPTKU(D) clamps may be applied per piece, per set or with several clamps
straighten,
simultaneously used as temporary tackle eye or for the lifting of steel beams and profiles.
attempt to bend
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
or heat treat
or more, a spreader beam is recommended.
parts.
„ When the IPTK(W) - IPTKU(D) clamps are used as temporary tackle eye the clamps may be
used only individually.
Clamps suited
„ Temperature: the operating temperature is between -40 ºC (-40 ºF) and 100 ºC (212 ºF). For
for stainless
other temperatures contact your CrosbyIP Customer Service Centre.
steel, must be
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
used only for
acid, alkaline).
handling
„ Loads: For proper application of the clamp consult the load diagrams 1.
stainless steel,
„ Ensure that all attachments between lifting eye and crane are properly fitted, secured and
to avoid contact
coupled.
corrosion.
„ IPTKU(D): 100% W.L.L. at 45° cross loading can be achieved provided that special demands
regarding flange thickness and fixation are met. Please contact your CrosbyIP Customer
Service Centre for more information.
„ Remark: when handling the load, one should ensure that the load and or clamp does not
encounter obstacles which could release the load on the clamps prematurely.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPTK(W) - IPTKU(D)
Lifting beams - temporary lifting point