Descargar Imprimir esta página

Halo ELITE 2B Guía Esencial página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

CARING FOR YOUR ELITE2B
USE + CARE
Regularly clean your HALO Elite2B Outdoor
Griddle between uses and especially after
extended periods of storage.
Make sure the HALO Elite2B Outdoor Griddle and
its components are adequately cooled before
cleaning your griddle.
Never handle hot parts with unprotected hands.
We strongly recommend the unit be covered to
extend and maintain the life and condition of your
HALO Elite2B Outdoor Griddle. (Halo Griddle Cover
P/N HZ-5003 can be acquired at www.halo-pg.com
once available for purchase) when left outside for
any length of time after each usage, especially during
the winter months.
Empty and clean the grease cup after every use.
STORAGE
Annual checking and tightening of fasteners and
fittings are recommended before storage.
Store your HALO Elite2B Outdoor Griddle in a
cool, dry place.
We recommend covering the burners with
aluminum foil in order to prevent insects or other
debris from collecting in the burner ports.
If storing your HALO Elite2B Outdoor Griddle
indoors, the gas cylinder must be disconnected
and left outside.
The gas cylinder should always be stored outside
and in a dry, well-ventilated area and out of reach
of children.
24
FIRST TIME CLEANING
THE
GRIDDLE SURFACE
HALO griddles are pre-treated with cooking oil to
prevent rust and damage during shipping. For first time
use, wash griddle with hot, soapy water between uses
and especially after extended periods of storage.
THIS IS THE ONLY TIME YOU SHOULD USE SOAP ON THE
GRIDDLE COOKING SURFACE.
Proceed with seasoning instructions. (Please reference
the Griddle Seasoning Instructions section on page 23.)
CLEAN
+
MAINTAIN YOUR
GRIDDLE
STEP 1
To clean the griddle after each use, cool griddle below
300° F, scrape gently with a metal spatula or scraper.
STEP 2
Wipe down the griddle surface with a cloth or paper
towel. Pour water onto the hot griddle surface for tough
food residue and let it boil the residue off.
STEP 3
You should apply a very thin coat of oil to maintain your
seasoning bond and protect it from rust after you are
done using your griddle.
STEP 4
If rust or scaling, rub it off with steel wool and re-season
the surface.
Rinse and dry completely.

Publicidad

loading

Este manual también es adecuado para:

Hz-1003-xna