Rothenberger ROLeak Aqua 3Plus Instrucciones De Uso página 18

3 Scope of delivery
The standard package includes:
• leak detector + headphones
• case
• micro-USB recharger with dual outputs
• probe tip, V2A, d = 10 x 31 mm
• 2 x probe tip extension rods
• magnetic adapter
• tripod adapter
4 Power supply
An internal Li-ion battery powers the ROLeak Aqua 3Plus.
The device can be operated for up to 15 hours from a fully charged battery. The battery symbol
at the top right of the display indicates the actual battery status. The battery symbol will start to
flash if the battery status is too low. The device will switch off some time later without another
warning.
Use the USB recharger provided in the package to recharge the device. It connects up to the
device via the USB socket (4) and it also connects up to the general power supply. A complete
recharging cycle takes approx. 6 hours. The recharging progress is displayed on the device's
screen.
The integrated battery is not replaceable.
Do not open the device. Contact your service partner if you have battery problems!
5 Function of the Unit
The ROLeak Aqua 3Plus is a simple to use, hand-held device used for acoustically de-tecting
leaks in pipeline systems.
The device uses an integrated acoustic sensor. The noises occurring in the pipework are rec-
orded by the probe tip, amplified and reproduced through the headphones. The measured noise
level is also simultaneously displayed on the device's screen.
The user can choose between three frequency filter settings during the measuring.
The probe tip can be detached from the device. This allows extensions to be inserted or other
probe heads to be used.
An external acoustic sensor, such as a floor microphone, can be connected up to the device via
the sensor socket.
Bluetooth is used to establish the connection between the device and the headphones.
5.1 Design
The following image shows you the device's probe tip, sensor and connection sockets:
The following image shows you the device's control panel:
16
1 Probe tip (exchangeable, M8 thread)
2 Device's acoustic sensor (cannot be dismantled)
Sensor socket for connecting up an external
3
acoustic sensor (floor microphone, etc.)
4 Micro USB socket for recharging the battery
ENGLISH