Publicidad
Idiomas disponibles
Idiomas disponibles
While operating jump starter, you should consider
basic safety precautions to avoid the risk of fire,
electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your jump starter.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
to ensure your own safety. Always operate the jump starter
carefully and responsibly. In using the appliance, you
accept full responsibility for any accidents caused to third
parties or their goods during its use.
The jump starter may only be used by people who have read
the instruction manual and are familiar with its handling.
Before operating the jump starter for the first time, users
should be instructed by the seller or any other qualified
person on how to use it. Users must ensure they are
instructed adequately and practically.
The instruction manual is considered an integral part of the
appliance and must always be made available alongside
the product.
Never allow the power tool to be operated by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the appliance, or others unfamiliar with the use
instructions.
The jump starter may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the power tool, is not permitted.
For safety reasons, any changes to the jump starter are
prohibited. The warranty on your jump starter will be voided
if you alter it in any way.
Do not operate the jump starter in explosive environments,
such as in the presence of flammable liquids, gases or dust.
The supply voltage must match the technical
specifications of the power tool. Keep the voltage
between ± 5% of the rated value. Do not operate the jump
starter in places where the supply voltage is not stable. The
power cord must be plugged into a socket with differential
protection and earth terminal.
If the workplace is extremely hot, humid or with a high
concentration of dust, the socket circuit must be protected
with a circuit breaker (30 mA) to ensure the safety of the
user.
Do not expose the power tool to rain or operate it in wet or
damp conditions. The presence of water in a power tool
increases the risk of damage and electric shock to the user.
Keep the jump starter away from heat sources, oil,
sharp objects and rotating attachments. Check the
condition jump starter, if it is damaged, it must be replaced
or repaired by a qualified technician.
Any misuse or use not in accordance with the intended
purpose will lead to warranty revocation. The manufacturer
is not liable for any damage caused by incorrect use. The
appliance is not suitable for industrial use.
Publicidad
