1
Introduction
ENG
1.1
This manual
This manual is intended for users of the Tonone Bella lamp. Please read this manual carefully for correct use of the
Tonone Bella lamp. We recommend that you keep this manual in a safe place and within easy reach.
Please note!
This manual contains the installation steps. Installation instructions may vary per Beads lamp type.
Please consult the relevant section depending on which type of Bella lamp you have purchased.
If you have any questions about the installation of the lamp or about one of our products, please
contact Tonone. E info@tonone.com T +31 (0) 85 782 13 33. All the dimensional drawings of the
Bella lamps can be found on the Tonone website.
1.2
Product description
This product is exclusively intended as source of lighting for private, indoor use. We do not recommend the
product be used differently or that it be modified. This may result in incorrect usage and may lead to accidents.
The manufacturer is not liable for any damage caused by incorrect usage of the product. The product is not
intended for commercial purposes.
1.3
Safety symbols
The following safety symbols are used in this manual: This symbol indicates important instructions
that must be followed to avoid potentially dangerous situations from arising, as well as to prevent any
damage. The manufacturer is not liable for damage in any way caused by incorrect use of the product.
1.4
Warranty
The warranty expires in the event of improper use, if changes are made to the product or if you carry out repairs
yourself.
1.5
Symbols used
CE marking: CE stands for Conformité
Européenne and means that the Bella lamp
meets the requirements of European quality
standards.
KClass II symbol: Appliance class II: The
Bella Table lamp is a double insulated
appliance. The appliance does not require
connection to electrical earth.
Waste handling: The lamp requires special
waste handling and may not be placed in
unsorted waste for removal. Please contact
the local authorities for collection or visit
the municipal waste collection facility.
Recycling: The materials and substances
used in the packaging materials of the
products are listed on the pack-aging to
aid identification and classification by the
relevant authorities and to aid collection,
recovery, reuse and recycling. 20 PAP is the
recycling symbol for cardboard.
Fragile: Please handle the packaged lamp with
care during transportation to ensure it reaches
its destination undamaged.
This side up: Please ensure that the arrows
on the packaging point upward to ensure the
lamp reaches its destination undamaged.
Dry: Please ensure that packaging does not
come into contain with any liquids to ensure
the lamp reaches its destination undamaged.
5