Publicidad
Idiomas disponibles
Idiomas disponibles
Attention: Plastic parts are best routed at low speeds!
Do not store the tool until it has completely stopped.
Do not store in dusty places. Dust can get into the machine everywhere and cause the
mechanical parts to malfunction.
8. CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
8.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9. TECHNICAL DATA
Voltage
Mains frequency
Power
No load speed
Cutting depth
Spindle diameter cutter
Weight
Protection Class
Double insulated
10. NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
230V ~
50 Hz
1200W
11.000-30 000 min
35 mm
8 mm
3.3 kg
II
86 dB(A)
97 dB(A)
6,23 m/s²
7
-1
K = 1,5 m/s²
Publicidad
