Descargar Imprimir esta página

Porter Cable PCCL500 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Fig. F
Fig. G
4
Fig. H
5
Light Levels
The task light has 2 brightness levels, up to 1900lm.
Continue to press the on/off button
HI-LO brightnesses.
On/Off Switch

CAUTION: Do not stare into task light lens. Serious
eye injury could result.
To turn the task light on, press the on/off button
To turn the task light off, press the on/off button until the
light goes out.
Pivoting The Light Housing (Fig. I)
The task light housing 
2
positions within the 360 degree pivot range.
1. To pivot the task light housing first loosen the pivot nut
 6 
as shown in Figure H.
2. Rotate the task light housing to your desired position.
Tighten the pivot nut
8
to cycle from OFF-
 1 
 1 
can be pivoted to different
 6 
.
Fig. I
2
AC Outlet/AC Plug (Fig. J)
The task light can be powered by battery or 120v AC.
1. First remove battery from battery slot.
2. Fit an extension cord into the AC plug
wall outlet to power the task light.
Fig. J
Maintenance

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from power
source and remove the battery pack before
making any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
Lubrication

WARNING: NEVER spray or in any other way apply
lubricants or cleaning solvents inside the tool. This can
seriously affect the life and performance of the tool
and may result in personal injury.
Cleaning
.

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Repairs
The charger and battery pack are not serviceable.
6
 2 
then into a

Publicidad

loading