Pur Line CHE-700 Manual De Usuario página 13

CONTROL PANEL
The controls are located at the bottom of the fireplace. It takes some time for the receiver to respond to the
transmitter. Do not PRESS the buttons more than once within two seconds for correct operation.
Power the Fireplace
Press this button once , flame is turn on.The unit becomes energized and you can select the following
functions as desired. Press this button again, the unit will be off.
Timer
Press this button and "+"or "-" to set up the real-time, Day(Monday-Tuesday-Wednesday-Thursday-
Friday-Saturday-Sunday), Hour and Minute.
Dimmer Minus
Setting 5 is the brightest grade. Setting is 5-4-3-2-1.
Dimmer Plus
5 settings, 1-2-3-4-5.
HEAT
Two settings. Press one time is low heat, press two times is high heat, press again is heating off, and
fan will continue working for 10 seconds after heating off.
REMOTE CONTROL
Remote control requires one 3V CR2025 Lithium Cell Battery (included). Remove the protective sheet between
the battery and the contacts in order to operate.
EN
13