Publicidad
Idiomas disponibles
Idiomas disponibles
UPS Feature
This product has a bypass mode, which can output directly from AC mains
without going through the battery.
In the UPS state, when the AC input power of the commercial power is cut off
due to a power failure, it can automatically switch to the product battery power
supply within about 8 milliseconds to ensure the AC output.
UPS Connection Diagram
As shown in the figure below, connect the product between the socket and
the electrical appliance, and the power of the product is in the ON state.
When you turn on a powered device, the powered device uses the main AC
power directly.
ln this state, when the main power supply is cut off, it will automatically switch
to the product's internal battery power supply.
※In the UPS mode of U. S. and JPN standard, the maximum power of AC output is
below 1100W, and the AC output exceeds 1100W, and the "
flashes to indicate overload.
※In the UPS mode of CN, UK, EU and KR standard, the maximum power of AC
output is below 2400W, and the AC output exceeds 2400W, and the "
icon flashes to indicate overload.
UPS Mode
6
" AC output icon
" AC output
Publicidad
