Publicidad
PIE REMOVIBLE
T-NOTCH OPENING-------'
OUVERTURE ENT
ABERTURA T-NOTCH
SUCTION CUP BASE
BASE DE SUCCION
VENTOSA BASE
MOUNTING:
1. Find a location on your windshield that is out of your direct line of sight.
2. Clean the surface on your preferred windshield location using the included wipes.
3. Peel off the wrapping from the bottom of the base and position on your preferred location.
4. Press down on the base to apply pressure and lock the suction lever (Figure 1).
5. Insert T-notch hitch into the T-notch opening on back of holder. Slide T-notch forward and up into the slot to lock the
universal holder in place (Figure 1 ). Rotate the universal holder to the desired angle.
Note: The STICKGRIP material on the holder may decrease its strength when contaminated with dirt, dust and other
foreign particles. This can be reversed by property cleaning the STICKGRIP material with soap and water, then air drying.
(1) Support pour installation sur la grille de ventilation
(1) Soporte para montaje en rejil/a de venti/aci6n
FIGURE 1
FIGURA 1
----------REMOVABLE/ADJUSTABLE ARMS
+- -- - -- - -- ---- -- -- - UNI V ERSAL HOLD ER
2
PARTS INCLUDED:
(1) Mounting base
(1) Universal holder
(1) Vent mount bracket
(2) Pressure clips for vent mount
(2) Alcohol prep pads
LES PARTIES ONT INCLUS:
(1) Montage de base
(1) Support universe/
(2) Attaches pour support
installation surla grille de ventilation
(2) Chiffon de nettoyage a/coolise
LAS PARTES INCLUYERON:
(1) Base de montaje
(1) Monte universal
(2) Ganchos para rejilla de ventilaci6n
(2) Almohadilla de preparaci6n con alcohol
BRAS AMOVIBLES/AJUSTABLES
BRAZOS REMOVIBLESIAJUSTABLES
SUPPORT UNIVERSEL
MONTE UNIVERSAL
360 DEGREE ROTATING T-NOTCH HITCH
ATTELAGE ENT
300 DEGRES DE ROTATIF
A
ENGANCHE T-NOTCH CON 300
GRADOS DEL ROTACION
LEVIER DE SUCC/ON
PALANCA DE SUCCION
a
SUCTION LEVER
Publicidad
