Tannoy SGM 10A Guia De Inicio Rapido página 36

70
SGM 10A/12A/15A
Specifications
System
Frequency response
Nominal dispersion
Maximum SPL
Crossover type
Crossover frequency
Transducers 1 x 10" (254 mm) paper pulp cone with twin roll
impregnated fabric surround
2" (52 mm) edge-wound voice coil
1 x 1.3" (33 mm) aluminium/magnesium alloy
dome with edge-wound voice coil
Limiter Independent high and low frequency limiters
Magnetic shielding
Amplifier
Maximum output power*
Type
Protection
Connectors
Inputs
Sensitivity for max out with
Level control at 5
Input impedance XLR: 11 kΩ unbalanced/22 kΩ balanced,
Maximum input level
Outputs
User controls
Power Supply
Power consumption
Voltage (fuses)
Mains supply
Enclosure
Dimensions (HWD)
Net weight
*Independent of limiters and driver protection circuits
SGM 10A
40 Hz – 30 kHz ±6 dB
90° conical @ -6 dB point
116 dB
2 way, active
1.2 kHz
No
600 W
LF: Class-D HF: Class AB
Short circuit, thermal
1 x XLR/1/4" TRS combo jack,
balanced/unbalanced
1 x RCA, unbalanced
XLR: +4 dBu/RCA: -10 dB V, nominal
RCA: 11 kΩ unbalanced
+20 dBu
Link: 1 x XLR, balanced
Power on/off, level, treble roll off,
treble energy
140 W @ 1/8 max power
100-120 V~ 50/60 Hz (T 8 A H 250 V),
220-240 V~ 50 Hz (T 4 A H 250 V)
IEC mains connector with
integrated power switch
523 x 351 x 292 mm
(20.6 x 13.8 x 11.5")
18.4 kg (40.5 lbs)
SGM12A
38 Hz – 30 kHz ±6 dB
90° conical @ -6 dB point
121 dB
2 way, active
1.2 kHz
1 x 12" (300 mm) paper pulp cone with
twin roll impregnated fabric surround
2" (52 mm) edge-wound voice coil
1 x 1.3" (33 mm) aluminium/magnesium
alloy dome with edge-wound voice coil
Independent high and low frequency limiters
No
600 W
LF: Class-D HF: Class AB
Short circuit, thermal
1 x XLR/1/4" TRS combo jack, balanced/unbalanced
1 x RCA, unbalanced
XLR: +4 dBu/RCA: -10 dB V, nominal
XLR: 11 kΩ unbalanced/22 kΩ balanced, RCA: 11 kΩ unbalanced
+20 dBu
Link: 1 x XLR, balanced
Power on/off, level,
treble roll off, treble energy
140 W @ 1/8 max power
100-120 V~ 50/60 Hz (T 8 A H 250 V), 220-240 V~ 50 Hz (T 4 A H 250 V)
IEC mains connector with integrated power switch
849 x 447 x 292 mm
(33.4 x 17.6 x 11.5")
30 kg (66 lbs)
71
Quick Start Guide
SGM 15A
35 Hz – 30 kHz ±6 dB
126 dB
1.1 kHz
1 x 15" (380 mm) paper pulp cone with
twin roll impregnated fabric surround
2" (52 mm) edge-wound voice coil
1 x 1.3" (33 mm) aluminium/magnesium
alloy dome with edge-wound voice coil
Power on/off, level, treble roll off,
treble energy, presence energy
1019 x 650 x 409 mm
(40.1 x 25.6 x 16.1")
50.4 kg (110.9 lbs)