Figure 4
Figure 5
Figure 6
PAGE 2 OF 6
INSTRUCTIONS FOR UNIT ASSEMBLY CONTINUED
2. Slide post through underside of shelf until shelf slides firmly
over supports. (See Figure 4)
3. Stand unit upright. Gently tap shelf down to secure it. (See Figure 5)
NOTE: Shelves will not be evenly spread apart. Use discretion while
spacing the rest of the shelves. Spacing recommendations are
provided below.
4. For H-9906 and H-9907 units, count 11-12 whole post spacing slots up from
previously placed shelf. Snap on shelf supports, then add and secure shelf.
(See Figure 6)
5. For H-9908 unit, count 15-16 whole post spacing slots up from previously
placed shelf. Snap on shelf supports, then add and secure shelf.
(See Figure 6)
6. Depending on the unit you are assembling, repeat step 4 or 5 to add the
remaining shelves.
NOTE: Top shelf should be installed into the top groove of each post.
Bins should not be placed on top shelf.
1-800-295-5510
uline.com
0122 IH-9906