Technical data
Article no.:
Designation:
Pull-off strength:
Max. load-bearing capacity:
(on flat material)
Max. load-bearing capacity:
(at 6° inclination acc. to EN 13155)
Dead weight of the magnet:
Storage temperature:
Operating temperature:
Markings on the lifting magnet
There are additional detailed descriptions for handling and conditions of use on both sides of the lifting magnet.
This labelling must not be modified, damaged or removed, as otherwise the manufacturer is released from liability
for any personal injuries, property damage or accidents resulting from this fact. New labels must be ordered from
the manufacturer if necessary.
Start-up
You receive a completely assembled lifting magnet and detailed operating manual. Please check the condition of
the goods on receipt for any transport damage, and make sure the delivery is complete. Otherwise contact the
manufacturer immediately.
Always read the operating manual before using the device for the first time!
1. The lever is facing upwards. The lifting magnet is deactivated.
41250
Lifting magnet TML 250
min. 750 kg from 10 mm S235
250 kg from 10 mm S235 with 1:3 safe working load
230 kg from 15 mm S235 with 1:3 safe working load
3.5 kg
-30°C to +60°C
-10°C to +60°C
13