BYK micro-TRI-effect Instrucciones Resumidas página 9

BYK-Gardner GmbH
5 Measurements Modes
Take readings without worklist
In this mode free measurements can be made and named.
1. Click on instrument icon and place unit on sample.
2. Press Operate or click on the instrument icon to take a reading.
3. Circles represent the four pins on the bottom:
4. A minimum of three pins need to be pressed.
5. To cancel reading click on back arrow.
Number of readings per sample depends on instrument. Instrument must be lif-
ted between readings.
Input of sample identification
All readings are automatically saved for transfer to the PC.
Default name is "Sample" with an incrementing number.
1. To change default name, click on name field and the keyboard opens.
2. Select desired letters or numbers and confirm with the checkmark.
3. Use backspace arrow to delete input characters.
300 100 336 - 2109
– Green = Pressed.
– Red = Not pressed.
micro-TRI-effect
9