Descargar Imprimir esta página

WPool E-Optimus 7 Manual De Instrucciones página 37

Publicidad

Warning
Before installation, check the condition of your heat pump upon receipt and make the usual
reservations. If you have any doubts or problems, send an AR letter to your installer or contact the
manufacturer within 48 hours. After this period, no claim can be accepted.
In order to offer our customers reliable and quality products, it has been manufactured according to
strict manufacturing and production standards.
This manual contains all the information necessary for the installation, troubleshooting and maintenance of the unit.
Please refer to this manual before servicing or operating this unit.
The installation and commissioning of your device must be carried out by qualified specialist personnel in
accordance with the applicable safety standards. Please read these instructions carefully. We will
not be held responsible for any injury or damage to the machine resulting from installation errors.
Failure to follow these instructions will result in loss of warranty.
Only use original spare parts from the manufacturer, failure to do so will result in loss of warranty.
Your heat pump unit must only be used to heat a swimming pool. Its use is reserved for heating and
maintaining the temperature of a pool in conditions predetermined by a thermal assessment to be carried out with a
dealer before choosing the heat pump.
This heat pump respects the manufacturing and communication standards defined by the DTP10 of the FPP and
NFPAC.
CAUTION:
Do not use any means or process to accelerate the defrosting or cleaning of your heat pump. Do not pierce or burn
or place near a source of combustion. The refrigerant gas must not contain a strong odor.
This appliance is not intended for use by children or persons of reduced physical or mental ability without supervision
as this may result in serious injury or death.
The manufacturer and distributor shall not be held responsible for any damage to property and/or personal injury
caused by improper use/installation.
The installation must comply with local electrical standards and be properly grounded. The device must be
disconnected from the mains before any intervention.
Directive 2002/96/EC (WEEE):The crossed-out wheeled garbage can symbol on the bottom of the device indicates
that this product, at the end of its useful life, must be disposed of separately from household waste, taken to a recycling
center for electrical and electronic equipment, or returned to the dealer when an equivalent device is purchased.
Directive 2002/95/EC (RoHs): This product complies with Directive 2002/95/EC (RoHs) on the restriction of the use of
harmful substances in electrical and electronic equipment.
The installation of a circuit breaker is necessary to prevent the risk of fire and electric shock. If the power supply is
damaged, please have it replaced by a professional in order to avoid personal injury and property damage.
37

Publicidad

loading

Productos relacionados para WPool E-Optimus 7