Publicidad
Control panel TM5102 for tubular
motors and dampers
User Manual - Control Panel
I. TECHNICAL SPECIFICATIONS
1 Power supply: 220V AC50Hz
2 Working temperature: -20º +60
3 Codification: 2 HP, 250V
4 Integrated fuses: electric circuit (0.5A),
motor (10A)
5 Working frequency: 433.92MHz
6 Max. Storable transmitters: 30
7 Size: 113x74x44 mm
8 Weight: 330g
III. CONNECTIONS
IV. OPERATING INSTRUCTIONS
Make sure the power supply is disconnected before connecting.
If possible, position the damper halfway before connecting the device.
After removing the control unit cover, connect the AC220V power supply, the green LED lights up.
Deletion of all the memory
Press the S1 key with a pointed object (the red LED lights up) and hold it down for about 8 seconds until the LED returns green.
Release the S1 key: the red LED flashes once and then returns green. Now the memory has been deleted.
EN
www.koomando.com - remote control store
II. SAFETY INSTRUCTIONS
- Please read this manual carefully before operation.
- Ensure that the device is not powered up before opening the
appliance cover.
- Delete the memory before starting the control unit (ref. IV.
Deletion of all the memory).
- The signal can be disturbed by other communication devices.
- The control unit must only be used for the manual control and/or
radio control of gear motors for roller shutters and awnings.
Use for the control of high-risk systems is prohibited.
- All safety risks must be eliminated before use.
220 VAC
Publicidad
