Descargar Imprimir esta página

KOOMANDO TM1502 Manual Del Usuario página 6

Publicidad

Transmitters learning
1 Press and release the S2 key: the red LED lights up.
2 Press a key on the transmitter twice The LED on the control unit flashes 8 times.
The storage was successful.
If no signal is transmitted within 8 seconds, the control unit exits the learning phase.
3 If the LED flashes only once and turns green again, storage has failed. Repeat the operations from point 1.
Repeat the same operation for all the remote controls you need.
Functional checks
Press the ▲ button (up arrow) and check that the damper opens.
If instead of opening it closes, press the ▀ (STOP) button, disconnect the power supply and invert the terminal cables
▲ UP and ▼ DOWN.
By pressing the memorized key of the transmitter several times you will have the sequence OPEN-STOP-CLOSE-
STOP ....
During the closing phase, if the signal between the photocells is interrupted, the motor stops immediately
Connections
L - N 220V line input.
COM - ▲ - ▼ motor output.
+ 24V AC photocell power supply output.
GND - PHOTO connect the NC contact of the photocell. If nothing is connected, do not remove the jumper.
GND - OPEN manual opening key or key connection.
V.
MOUNTING
Drilling
To mount drill two Ø6 holes 35 mm deep, 13 mm apart.
Mounting the support
Fix the support to the wall with the dowels.
Pay attention to the direction of the support:
The most protruding part must be positioned upward
(as shown in the figure).
Control unit installation
Attach the control unit to the support to be
attached to the wall.
ADDITIONAL REMOTE CONTROLS AND ACCESSORIES
You can buy other remote controls or accessories on the website www.koomando.com/accessori.html
Puoi visualizzare o scaricare le istruzioni in Italiano di questo prodotto all'indirizzo:
IT
https://www.itelecomandi.com/istruzioni-centraline/
o con la scansione di questo QRcode:
You can view or download english instructions for this product at:
EN
https://www.itelecomandi.com/istruzioni-centraline/
or by scanning this QRcode:
Vous pouvez afficher ou télécharger les instructions en français concernant ce produit à l'adresse suivante :
FR
https://www.itelecomandi.com/istruzioni-centraline/
ou en scannant ce QRcode:
Puedes visualizar o descargar las instrucciones en español de este producto en la dirección:
ES
https://www.itelecomandi.com/istruzioni-centraline/
o con el barrido de este QRcode:
Eine Anleitung in deutscher Sprache zu diesem Produkt können Sie unter der folgenden Adresse:
DE
https://www.itelecomandi.com/istruzioni-centraline/
oder durch Scannen dieses QR-Codes einsehen oder herunterladen:
Distributed by KOOMANDO Srl - via Giovanni Paolo II, 45/C - Azzano Mella (BS) - ITALY - 030 974 54 00 - info@koomando.com

Publicidad

loading

Productos relacionados para KOOMANDO TM1502