Publicidad
Idiomas disponibles
Idiomas disponibles
Calibration
Calibration (adjustment) ensures that the weighing precision of
your balance is maintained according to specifications, if exter-
nal effects have compromised pre-calibration (pre-adjustment).
If "L" is continuously shown on the display when the weighing
platform is in the active weighing position, you need to cali-
brate the balance. For this purpose, you can use a 100-g
weight (included with the balance) to adjust the accuracy of
the balance to better than 0.1g. To calibrate, switch on the
balance and briefly press the TARE/OFF key to zero the display.
Then hold down TARE/OFF and additionally press MODE/ON
until 100.0 appears on the display. At this point, place the
100-g weight on the weighing platform. Once the small arrow
(stability and weight indicator) is displayed on the right, cali-
bration (adjustment) has been completed, and you can now
remove the calibration weight.
CE Marking
The balance meets the requirements of the following Council
Directive issued by the European Union: 89/336/EEC "Electro-
magnetic compatibility (EMC)."
7
Publicidad
