Nedo SIRIUS 1 H Manual De Instrucciones página 9

General Notes
For your safety
Documentation
Please familiarise yourself with these operating instructions and the safety information
it contains before you start to work with the SIRIUS 1 H. These are based on the
current EN 60825-1:2014 and IEC/TR 60825-1:2014 standards. Observing these
instructions and this information ensures safe working. The laser may only be used by
trained personnel!
Laser radiation
The SIRIUS 1 H Rotating Laser is, depending on the version, a laser class 2 or laser
class 3R instrument, and conforms to EN 60825-1:2014.
2
3R
General safety instructions for handling laser radiation:

Prevent direct eye exposure to the beam!

Do not direct the beam at other people or into public areas!

To prevent reflections, do not point the laser at reflective surfaces.

If possible, do not operate the laser at eye level!

The housing of the laser may be opened by trained service technicians only!

The emitted laser radiation has the following properties:
-
-
-
-
-
Warning signs
Never remove the warning signs on the unit.
For users in Germany:
Please note and following the guidelines of the professional/trade association with liability for
industrial safety and insurance (Berufsgenossenschaftliche Richtlinie) BGI832 on the operation
of laser equipment: It is recommended that operation of a class 3R laser be registered with the
responsible professional/trade association (Berufsgenossenschaft) (BGI 832, Section 2.5).
Operating Instructions SIRIUS 1 H Rotating Laser
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
LASER RADIATION
AVOID DIRECT EYE
EXPOSURE!
CLASS 3R LASER PRODUCT
Power P 1mW / Power P

Wavelength : 630-680 nm


Beam divergence

Stationary laser dot: CW laser
Rotating laser dot: Laser pulse with f: 1Hz ... 10Hz
5mW

1.5 mrad
EN 60825-1:2014
P  1mW
: 630-680 nm

 1,5 mrad
EN 60825-1:2014
P  5mW
: 630-680 nm

 1,5 mrad
ATTENTION
EN
9