Publicidad
Idiomas disponibles
Idiomas disponibles
20 W PD CHARGER
WITH CHANGEABLE PLUG
INSTRUCTIONS FOR USE
Thank you for buying our product. We are sure that you will be
satisfied with it.
Product description
20 W PD CHARGER WITH CHANGEABLE PLUG
Input: AC 100-240 V (50-60 Hz) 0.6 A
Output: 5 V/3 A, 9 V/2.22 A, 12 V/1.67 A
Max. power: 20 W
Material: ABS + PC
Dimensions: 38 x 51 x 26 mm
Weight: 52 g
Package contents
1× charger – Epico 20 W PD CHARGER
1× EU PLUG
1× UK PLUG
1× US PLUG
1× instructions for use
Product use
To charge a device, connect the USB-C cable to the input on
the adapter and connect the other end to your device.
Always make sure that it is compatible with your mobile device
before using the adapter.
The charger has built-in safety elements that protect your
device from excessive current, overheating and overcharging.
The maximum output power of the charger is 20 W.
The charger supports fast charging for iPhone 8 and newer
models. Thanks to USB Power Delivery (USB-PD) you can
charge 50 percent of your iPhone's battery in 30 minutes.
Instructions for changing the charging plug
The adapter is shipped with a US charging plug that can easily
be replaced by either the EU or UK charging plug which are
included.
1. Before you start using the charging plug, always make sure
that it is compatible with your charging adapter.
2. With an upward motion, remove the charging plug from the
adapter and replace it with the plug of your choice.
3. Make sure that the charging plug is properly connected to
the adapter with no play between them.
Safety instructions
1.
Do not use the adapter if it shows any signs of damage.
2. Do not attempt to open the adapter, protect it from
humidity, water or high temperatures. Do not place the
adapter close to heat sources.
3. If you notice unusual overheating of the adapter, sounds
or other signs of malfunction, disconnect the adapter from
power and contact the appropriate technician.
4. Keep out of reach of children.
5. Keep the adapter and all its inputs clean, disconnect the
adapter from the power supply before cleaning, clean only
with a dry cloth.
6. The adapter may become slightly warm during use, pay
close attention to overheating. In this case, disconnect the
adapter from the power supply. Do not place any objects
on the adapter.
7.
If you do not use the adapter, disconnect it from power
supply.
8. Protect the adapter from falls and impacts.
9.
Do not insert any objects into the input in the adapter.
10. Do not force the USB-C cable connector into the adapter
input.
11. Use the adapter only according to the instructions in this
manual.
Disclaimer
The charging plugs have been designed exclusively for use
with suitable devices. Together with the charging adapter,
the product is intended for use with a suitable mobile device.
Always check the compatibility of the charger and any new
device before using it for the first time. The manufacturer bears
no liability for any damage to mobile or other devices caused by
improper use of this product.
This symbol on the product or in the accompanying
documentation indicates that the product must
not be considered a regular municipal waste and
must be disposed of in accordance with local
regulations. Pass thi product for environmentally
safe disposal. Proper disposal of this product
protects the environment. For more information,
contact your local municipal waste disposal office,
the nearest collection point or your dealer.
This product complies with all the essential
requirements of the EU directives that apply to it.
Class II - Protection against electric shock is
provided by double or reinforced insulation.
This symbol indicates that the product is intended
for indoor domestic use only. The product is not
intended for outdoor use.
EN
Publicidad
