Color Cascade Waterfall Fountain
Fountain Head
Note:
Slip Nut and Pipe Shim over
pipe before attaching to Elbow
Fitting / Fountain Head.
Flow-Control Collar
Triangle Relief Hole
Filter Screen
(Installed)
Filter Screen
Pipe Shim
Nut
12" Pipe
Flow-Control Fitting
18" Pipe
IMPORTANT INFORMATION TO
NOTE:
• DO NOT SUBMERGE the Fountain
in water
• Fountain ts into a 1 ½" threaded inlet
• Do not run the fountain 24/7 – For
decorating purposes only
• Lights may not be visible during
the day
• Remove the fountain during freezing
conditions. Damage will result if
fountain is not drained and stored
properly away from dust that might
block the fountain's jets.
• Because there is a wide variety of pool
types, these instructions may not be
suitable for all pools. Consult with
Nut
your pool dealer if the methods noted
in the instructions are not EASILY
adapted to your pool.
Pipe Shim
• One-year warranty against
manufacturer's defects – email
info@poolmaster.com for details
Elbow Fitting
Need Assistance?
Call our Customer Service Line:
800.854.1492
Visit our website @ poolmaster.com
eMail us @ info@poolmaster.com
1