Naterial SOLIS Manual De Instrucciones página 44

Cleaning
FR
ES
Wood is a living material that is very aesthetic, warm and e cient but it requires maintenance. It
is recommended to maintain your wooden garden furniture twice a year. A first time in spring and
then at the end of the summer. The cleaning is done with a brush and warm soapy water. But not
PT
with just any soap. The use of black soap or Marseille soap is preferred. Rinse thoroughly with
lukewarm water. In any case, do not use a high pressure cleaner. If you want the wood to keep its
original colour over time, use a "colourless saturator" that nourishes the wood and protects its
natural appearance for a long time. Apply the saturator twice a year on wood that has been
IT
cleaned beforehand with a dry cloth and apply it in the direction of the wood fibres. If after
cleaning, stains remain, you can then sand the surface with fine grain sandpaper. This is the
advantage of solid wood. If you have neglected the maintenance of your wooden furniture until
now, it is not too late to make up for the damage. Whatever your case, test your solution on an
EL
inconspicuous area to make sure the result is what you want.
For fabrics on sun sheltering products, a wet sponge and upholstery shampoo will help remove
stubborn stains. Strictly follow the cleaning recommendations on the labels of textile products.
PL
Wintering
In case of prolonged non-use or bad weather, it is recommended to store your product in a dry
place or to use a suitable cover to protect your it.
RU
The cushions and fabric parts of NATERIAL products should be removed when not in use for
long periods of time.
5. FASTENINGS
KZ
UA
6. REPAIR
Let's not throw away! Let's repair! Repairing a product is a quick and easy way to significantly
RO
increase its lifespan and avoid throwing it away. At Naterial, we actively work to facilitate the
repair of our products and o er the right spare parts for each product we sell. The service
department at your point of sale has a list of spare parts available for that product. In case of a
BR
defective or broken part, we invite you to contact the after-sales service of your point of sale.
7. LET'S PROTECT OUR ENVIRONMENT
In order to protect the environment, cardboard packaging and products at the end of their life
HE
cycle must be dropped o at a waste collection organization for sorting, processing and a new
life.
EN
For better stability and for your safety, tighten the screws once again around two
weeks after setup. Tighten the screws also at least once a year for a long-lasting
maintenance.
44