Silver Eagle SE215 Manual De Instrucciones

Operating Instructions
SPECIFICATIONS
Working Torque .........................20-260 ft.lbs.
Maximum Torque: .......................... 300 ft.lbs.
Blows per minute ..................................1,400
Free Speed: ..................................12,500 rpm
Recommended Air Pressure: ...............90 psi
Air Inlet: ...........................................1/4" NPT
Minimum Hose Size: ......................... 3/8" I.D.
Overall Length .............................................6"
Weight ...............................................2.65 lbs.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SE215
Warning Information
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
3/8" Heavy Duty Impact Wrench
Copyright © Professional Tool Products, 2006
1
SE215
Parts Breakdown
All rights reserved.
12/19/06