Publicidad
11. Front wheel (FW) – 1 pc; 12. Mudguard (M) – 1 pc; 13. 5-point safety belts (SB) – 1 set; 14. Cover on the front fork (HC)
– 1 pc; 15. Front fork (F) – 1 pc; 16. Pedals (P) – 2 pcs; 17. Foot rest (FR) – 1 set; 18. Brake (B) – 2 pcs
ASSEMBLY STEPS
WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY AND
THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.
1.Step 1 – See Figure 1: Fix the rear wheel in the rear part of the frame.
2.Step 2 – See Figures 2, 3 and 4: Slide the mudguard on the front fork correctly according on the arrows, marked on it.
Then slide the front fork through the opening in the front frame. Put the steering wheel on top of the front part of the frame.
Push carefully down in order to fix the steering wheel. You will hear a clicking sound.
3.Step 3 – See Figures 5, 6 and 7: Remove firstly the nut from the screw of the seat (Fig. 5). After that attach the seat to its
base on the frame (Fig. 6). The screw must pass through the base and the bottom part of the frame. Fix the screw with the
nut with black cap (Fig. 7).
4.Step 4 – See Figure 8: Attach the rear basket to the rear frame. Fix it using screw and nut.
5.Step 5 – See Figures 9 and 10: Connect to each other the bottom and upper part of the parent control handle (Fig. 9).
After that attach the handle to the bottom tube on the rear frame (Fig. 10). Fix using a screw.
6.Step 6 – See Figures 11 и 12: Fix both of the rails of the safety board to both of the supports on each side of the seat
(Fig. 11). Put the upholstery on to the plastic seat. Slide on the rails through the crotch part of the soft upholstery (Fig. 12).
After that attach both of the parts of the safety board.
7.Step 7 – See Figure 13: In order to fix the canopy, slide its plastic holders on the rails on each side of the backrest.
8.Step 8 – See Figure 14: Attach the front basket to the red button of the steering wheel.
PRODUCT FUNCTIONS
1.Seat – Photo f1a, f1b and f1c – Turn the seat so that the child faces the parents or the road: unscrew the nut in the base
of the seat, rotate the seat and put it in the position you want the child to face. After that fix it again with the nut.
2.Backrest – Photo f2 – The backrest can be adjusted in several laying positions using the button on its' back part. Push it
and in the same item put the backrest in the wanted position. Release the button in order to fix the seat.
3.Foot rest – Press the pop-out metal buttons to take off the foot rest. Then press the red buttons in the base of the holder
of the foot rest. Turn the holder so that it is pointing upwards. Attach again the foot rest to the holder. This way you can use
the foot rest when the backrest is in the most laying position.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
•Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such, containing
abrasive particles.
•Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of damage
of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•Clean the tires regularly from sand or dust.
•Keep the tricycle clean.
2. Maintenance and storage:
•Before each use of the tricycle, check carefully the working order of all parts and connections:
-The screws must be tightened well;
-The wheels and handlebar must be strong and fixed stably;
-The wheels must move freely.
•You must not use the tricycle if you find that there are any loose, worn or damaged parts.
•The long use of the product may lead to loosening of the screws and nuts. Please, make sure that all nuts and screws are
tightened well, in order to protect the child from injury.
•Warning! DO NOT OVERTIGHTEN, in order to avoid breaking of the parts.
•Exposing the product to direct sunlight may lead to discoloration or fading of the color.
•Store the tricycle at a cool and dry place, when you are not using it.
•Store the product away from direct sunlight and sources of heat – open fire, heaters or cookers.
•Check the product regularly before and after each use for malfunctions, cracks, broken or missing parts. Stop using it if you
find any damage until it is removed. For this purpose, contact the person you bought the product from, or the importer!
Made for BYOX in China
Importer: Moni Trade Ltd. ,
Address: Bulgaria, city of Sofia, Trebich quarter, 1 Dolo Str., Tel.: +359 2/ 936 07 90
Web: www.byox.eu; www.moni.eu
10
Publicidad
