Opsobjects OPSISMART ACTIVE Manual De Instrucciones página 26

INSTRUCTIONS
1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a charger (5V 1A)
or PC and correctly position the other end of the cable on the back of
the smartwatch.
12
9 3
DOM 28/02
82 13.4 348
bpm
6
I notify:
1) Use the charger only on a flat and stable surface.
2) If there is an obstacle between the smartwatch and the charging
cable, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do not leave
the device charging for whole nights). To avoid damaging the device,
use only the supplied cable.
4) Do not use if the charging device is damaged.
5) Unplug the charging device when cleaning the smartwatch, during
- 25 -