Metra Electronics AXXESS AXPIO-JL1 Instrucciones De Instalación página 7

1. Remove the bolts holding the tire onto the
spare tire mount.
2. Remove (4) 14mm bolts from the spare tire
mount, where indicated. (Figure A)
3. Disconnect any wiring and remove the spare
tire mount from the tailgate.
4. Remove (2) T-25 Torx screws to release the
camera mount from the spare tire mount.
(Figure B)
CAMERA REMOVAL
(Figure A)
(CONT)
(Figure B)
7
REV. 10/14/22 INSTAXPIO-JL1