Assembly; Attach Handle - EASYHOME DX118C Manual Del Usuario

Stick Vacuum

ASSEMBLY

ATTACH FLOOR TOOL TO VACUUM
• Gently, but firmly, insert the floor tool into the air inlet hole on the
bottom of the dust collection box.
• To disassemble the floor tool from the body, gently, but firmly,
pull the floor tool from the air inlet hole on the bottom of the dust
collection box.

ATTACH HANDLE

• Pull handle install lever up and insert the handle (with pole) into the
hole on the top of the main body. Re-attach handle install lever and
make sure the handle is secure.
• To disassemble the handle, pull the handle install lever on the top of
the main body and slowly pull out the handle.
6
service@801service.net
Assembly
AFTER SALES SUPPORT
866 558 8096