Burberry BU Serie Manual Del Usuario página 10

AUTOMATIC WITH POWER
RESERVE MOVEMENT
Power reserve
indicator
POWER RESERVE FUNCTION
The power reserve indicator shows how much the watch is wound, allowing you to see
how much longer the watch will run at a glance. The time pointed to by the power reserve
hand is the remaining time. This product has an automatic-winding system which comes
with a power reserve indicator function. The mainspring will be automatically wound by
your natural arm movements while you wear it on your wrist. The power reserve hand is
pointing to the fully-wound position (40H). The amount the watch is wound will change
with the frequency of your arm movements and the length of time you wear the watch,
so the hand will not always point to the fully wound position. If you remove the watch
from your arm and do not wind manually, the power reserve hand will move toward zero
as time passes.
POWER RESERVE WINDING
1. Unscrew crown to position I.
2. Turn crown clockwise until the power reserve hand at 6 o'clock reaches the number 40.
This will power the mainspring of your watch and the power reserve will be at the
maximum. The rotor will continue to wind the watch as you wear it. The watch has a
power reserve of approximately 40 hours.
0 I II III
Crown
Date
11