Burberry BU Serie Manual Del Usuario página 8

AUTOMATIC GMT MOVEMENT
Second hand
Hour hand
GMT hours
GMT hand
WINDING
1. Unscrew crown to position I.
2. Turn crown clockwise approximately 30 times.
3. Screw crown in until it stops moving (position 0).
This will power the mainspring of your watch. The mainspring will be automatically
wound by your natural arm movements while you wear it on your wrist. The watch
has a power reserve of approximately 38 hours.
SETTING THE TIME
1. Unscrew crown to position I.
2. Pull crown out to position III, the watch stops.
3. Turn crown until you reach the correct time.
4. Push crown back to position I and screw crown until it stops moving (position 0).
SETTING THE DATE
1. Unscrew crown to position I.
2. Pull crown out to position II, the watch continues to run.
3. Turn crown anti-clockwise until you reach the correct date.
4. Push crown back to position I and screw crown until it stops moving (position 0).
Minute hand
0 I II III
Crown
Date
9