Publicidad
Idiomas disponibles
Idiomas disponibles
Switch off the power and disconnect the power plug before dismantling, assembling or
cleaning the device, power adapter and charging station.
Do not clean the device by spraying water on it or immersing it in water. The device is
not waterproof.
BATTERY & CHARGING STATION
Connect the power adapter to a power source that matches the specifications. The
power adapter is designed for connection to hazardous electrical voltages. Do not
attempt to repair the adapter. Replace the whole unit if it is damaged or exposed to
high moisture. Consult local HOBOT dealer for help and maintenance.
Make sure the device, power adapter and charging station are not trapped under
heavy objects.
Allow adequate ventilation around the device, power adapter and charging station. Do
not cover them with objects.
Do not use the device, power adapter and charging station in a strong magnetic field,
humid or high heat environment.
Use the original power adapter, battery and charging station that came with the device.
Use the third-party components may result in damage, malfunction and/or danger.
This device contains batteries that can only be replaced by professionals.
Battery can explode, catch fire, and/or cause burns if disassembled, crushed, cut,
punctured, short-circuited, incinerated, recharged (disposable cells), or exposed to
water, fire, or temperatures above 60°C (140°F).
If the device is not in use for a long period of time, store it in a dry and safe location.
The battery will need to be charged every 3 months to maintain battery life.
Never operate this device if the cord or power adapter is damaged. Ensure the power
cord is not stretched or exposed to sharp object or edges.
Laser Safety
The laser distance sensor of this product meets the standards for Class I Laser Products in
IEC 60825-1:2014 and will not generate hazardous laser radiation.
Copyright & Trademarks
Copyright © 2022 by HOBOT® Technology Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this company. All other logos, products, or company names
mentioned in this manual may be the registered trademarks or copyrights of their
respective companies, and are used for informational purposes only.
Disclaimer
SMARTTEK DEVICES S.L. makes no claims or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, tradability or
suitability for any particular purpose. Furthermore, SMARTTEK DEVICES S.L. reserves the
- 2 -
Publicidad
