Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
1.
Insert 4 wood dowels (D) into wood dowel holes on upper left side panel (2) and upper right
side panel (3).
2.
Attach middle connection board (6) to upper left side panel (2) and upper right side panel (3)
by inserting wood dowels (D) into wood dowel holes on middle connection board (6).
3.
Insert 4 screws (C) through holes on middle connection board (6), then tighten to upper left
side panel (2) and upper right side panel (3).
STEP 8
8
1. Insert 2 wood dowels (D) into wood dowel holes on lower left side frame (7).
2. Attach 2 middle cross bars (9) to lower left side frame (7) by inserting wood dowels (D) into
wood dowel holes and inserting cam bolts (A) into cam lock holes on middle cross bars (9).
3. Insert 2 cam locks (B) into cam lock holes on middle cross bars (9), then rotate clockwise to
secure cam bolts in place.
4. Attach rear bottom cross bar (10) to lower left side frame (7) by inserting 2 screws (O)
through holes on lower left side frame (7), then tighten to rear bottom cross bar (10).
5. Repeat above steps to assemble lower right side frame (8) to middle cross bars (9) and
rear bottom cross bar (10).
2
3
9
B
D
B
9
D
O
O
D
D
C
D
C
D
B
D
B
10
D
C
C
6
7
O O
Publicidad
