Guide C640 Guia De Inicio Rapido página 27

II. Interface
⑩
⑨
⑧
⑦
1 Emissivity. Set the emissivity value based on the measured target;
2 Temperature measurement range. Click to enter the interface of
temperature measurement range setting;
3 Temperature measurement parameters. Click to enter the interface
of temperature measurement parameter setting (relative humidity,
distance and atmospheric transmissivity, etc.);
4 Setting. Click to enter the setting interface. You can also enter the
setting interface by pressing the physical button "MENU";
5 LEVEL SPAN mode. The default is automatic mode. You can switch
among automatic, semi-automatic and manual modes through the
physical button or touch screen;
6 Popup-menu icon. Entering the popup shortcut interface, you can
set up the shortcut menu;
7 Time and date. Enter setting - general - date and time for setting;
22 EN
⑥
①
②
③
④
⑤