TFA_No_30.3034.10_Anl_02_23
Wireless thermometer
• If you have installed more than one transmitter, press the RESET/
CH/+ button to change between the outdoor transmitters. Display for
channel 1
, for channel 2
9. Positioning of base station and transmitter
• Choose a shady and dry position for the transmitter. (Direct sunshine fal-
sifies the measurement and continuous humidity strains the electronic
components needlessly).
• Place the base station at the final position. Avoid the vicinity of any inter-
fering field like computer monitors or TV sets and solid metal objects.
• Check the transmission of the signal from the transmitter to the base sta-
tion (transmission range 100 m free field, within ferro-concrete rooms,
especially with metal parts, the received signal is naturally weakened).
• If necessary choose another position for transmitter and/or base station.
• Use the bracket stand for mounting or standing when the signal is
received successfully.
10. Care and maintenance
• Clean the instruments with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the products for a long period of
time.
• Keep the instruments in a dry place.
10.1 Battery replacement
• When the batteries are used up, the low battery indicator appears on the
display (RX=base station, TX = transmitter).
• Please note: When the batteries are changed, the contact between trans-
mitter and receiver must be restored – so always insert new batteries into
both units or start a manual transmitter search.
11. Troubleshooting
Problems
No indication
on the base station
16
26.02.2023
16:33 Uhr
or for channel 3
.
Solution
➜ Ensure batteries polarities are
correct
➜ Change the batteries
Seite 9
Wireless thermometer
No transmitter reception
Display "---"
Incorrect indication
12. Waste disposal
This product and its packaging have been manufactured using high-grade
materials and components which can be recycled and reused. This reduces
waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the
collection systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable bat-
teries from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE).
This product must not be disposed of in ordinary household waste.
As a consumer, you are required to take end-of-life devices to a
designated collection point for the disposal of electrical and elec-
tronic equipment, in order to ensure environmentally-compatible
disposal. The return service is free of charge. Observe the current
regulations in place!
Disposal of the batteries
Never dispose of empty batteries and rechargeable batteries with
ordinary household waste. They contain pollutants which, if
improperly disposed of, can harm the environment and human
health.
➜ Start the transmitter search manually
according to the manual
➜ Check batteries of external transmitter
(do not use rechargeable batteries!)
➜ Restart the transmitter and the base
station according to the manual
➜ Choose another place for the
transmitter and/or the base station
➜ Reduce the distance between the
transmitter and the base station
➜ Check if there is any source of
interference
➜ Change the batteries
17