Descargar Imprimir esta página

Trisa electronics 9506.13 Manual Del Usuario página 39

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6 Preparing the hard floor cleaner for
the first use
6.1 Preparing the charging stand
The hard floor cleaner comes with a charging stand intended to house the hard floor cleaner for charging and
holding the brush roll, pipe cleaning brush and a detergent bottle (not provided).
To prepare the charging stand:
1. Attach the accessory holder Ⓠ and battery holder Ⓢ to the charging stand Ⓡ. ➋
2. Connect the adapter Ⓨ to the base. ➌
WARNING! Use only the supplied AC adapter with the appliance. Other AC adapters may
damage the hard floor cleaner. Do not use the supplied AC adapter with other appliances.
3. Connect the adapter Ⓨ to a suitable socket.
4. Put the charging stand Ⓡ on the floor.
6.2 Preparing the hard floor cleaner
To prepare the hard floor cleaner:
1. Hold the handle Ⓖ tightly and push it into the main body until you hear a click. ➍
2. Remove the screw and remove the battery cover Ⓚ. ➎
3. Put the battery Ⓙ in the hard floor cleaner.
WARNING! Do not use a battery that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
4. Attach the battery cover Ⓚ and screw.
76
Instructions for use TRISA Hard Floor Cleaner
6.3 Charging the hard floor cleaner
To charge the hard floor cleaner:
1. Lift the hard floor cleaner. ➏
2. Put the hard floor cleaner on the charging stand Ⓡ.
While charging, the display shows the current battery percentage and a spinning blue light.
If the battery is full, the display shows a solid blue light.
If the battery is below 20% capacity, the display shows a red battery symbol.
6.4 Setting and using the voice hints
The hard floor cleaner is equipped with voice hints to tell you, for example, that:
An automatic self-cleaning is due.
The water tank needs to be refilled.
The waste water tank needs to be emptied or cleaned.
The brush roll needs to be cleaned.
To set the voice language:
1. Press and hold the voice button Ⓕ for 3 seconds to switch between the languages:
English, German, Italian, French, and Spanish. ➐
To mute the voice hints:
1. Press the voice button Ⓕ briefly. ➐
Instructions for use TRISA Hard Floor Cleaner
77

Publicidad

loading

Este manual también es adecuado para:

Wet clean smart t0613