Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING MODE
ƒ IN A NETWORK - ONLINE
Does not contain actuators.
Only enables to command other devices of the Domus40 Series.
When set as ONLINE enables to:
– interact with other Domus40 Series, devices and:
– command devices with acting capacity, after detecting movement;
– consult room temperature readings through fixed and/or mobile platforms,
such as smartphones, tablets and computers, when the installation is
equipped with a Home Server (HS - Ref. 40930).
CONNECT THE MULTIFUNCTION SENSOR TO THE NETWORK -
1
STEP
ST
Press
RESET
seconds
until the
LED turns off.
2
STEP
ND
Click on PROG.
7
ONLINE
1.1 - The LED switches
on.
2.1 - The LED starts to
blink, indicating that it
is ready to be added to
the network, during a
period of 10 seconds .
15
Publicidad
