Publicidad
Idiomas disponibles
Idiomas disponibles
3
STEP
RD
Click on the com-
mand button of the
Installation Key (Ref.
40925)
in
proximity to the Mul-
tifunction Sensor.
PAIRING OF THE DEVICES THAT ARE ALREADY IN A NETWORK -
ƒ ON THE MULTIFUNCTION SENSOR
1
STEP
ST
Click on PROG to start
the PAIRING.
16
close
3.1 - The LED starts to
blinks red, indicating
that it is searching for
the device that is going
to be added.
3.2 - The LED blinks
green and switches
off, the device's LED
switches off, indicating
that the Multifunction
Sensor was successfully
added to the network.
Note: If the Installation Key LED
does not turn green and switch
off, repeat from the 1
step.
st
ONLINE
1.1 - The LED con-
tinues to blink and
all the devices in the
network also blink.
Publicidad
