ENERGY SISTEM z30 Manual De Usuario página 23

BLUETOOTH® FUNCTION
When you turn on your Energy Bluetooth Music Box z30 you start with the
Bluetooth® function, you will see the LED flashing, that means that it is
searching another Bluetooth® device to sync. In that moment you have to
sync with your Bluetooth® audio device, like smartphone, tablet, PC, Mac,
etc. You will find the Energy Bluetooth Music Box z30 as "Music Box BT".
Having the "Music Box BT" detected in your Bluetooth device, you just
have to select it and connect, after some seconds you will have the
connection is done. It is no necessary introduce any code.
Now you can start to use the wireless Bluetooth connection to play your
music.
If you want to connect another audio Bluetooth device you have to keep
pressed the MODE button (9) during 6 seconds in order to start with a new
search. You have to follow the same steps than before.
RADIO FM FUNCTION
Before using radio function, firstly you have to search the available radio
channels and will save them for visualising them later. It is not necessary
to repeat this search unless change of location of modification of the radio
stations' signal.
To search radio channel, press and keep pressing the play/pause button
(8) during 3 seconds. This will save all stations founded in the internal
memory of the device. This process may take a few minutes.
In order to select between different stations, you have just to press
forward button (11) or backward button (10). Stations will appear at the
same order as they were saved.
IMPORTANT NOTE: If you want to improve the reception quality of the radio
stations, connect USB recharge cable, as a receiving antenna.
23