PURE AIR 3 Manual De Usuario página 18

2.7.7 Bluetooth
Bluetooth is in pairing mode when the e-scooter is powered on. If the app
is connected, the Bluetooth icon is shown on the left side of the screen.
2.7.8 Cruise control
Cruise control is turned off by default, and can only be turned on via the mobile
app. When cruise control is enabled, the clock icon flashes white and two beeps
will occur.
When cruise control is enabled, holding the throttle at a constant speed for 5s
will activate cruise control. The cruise control icon will show solid white when
activated, and the e-scooter will maintain a constant speed when you release the
throttle.
Cruise control is deactivated by pressing the brake or throttle and is signalled by a
single beep.
Cruise disabled
User Manual | EN
Connect App
Enable cruise
setting via app
Cruise enabled
(inactive)
icon flashing
Throttle (hold 5s)
Brake press
Cruise active
17