PURE AIR 3 Manual De Usuario página 6

5. Fix the handlebar
Rotate the handlebar to align the holes in the stem
with the handlebar. Locate the stem bolts (within
the sealed package), and insert them loosely into
the stem bolt recesses.
7. Fully charge
Charge your e-scooter until the charger status light
changes from red to green
User Manual | EN
6. Tighten the bolts
Use the correctly-fitting Allen key supplied to
tighten the bolts. Don't tighten each screw all the
way in one go.
8. Tyre pressure
Check the tyres are inflated to the optimum
pressure of 36 psi. The correct preessure range can
be found on the side of your e-scooter's tyre.
5