Car and Driver CAD-AIRX300 Manual Del Usuario página 4

4
Inflating
Step 1. Connecting the inflator
Note: Before connection, put the sealing rings on the inflating connectors of
the included air hose and your inflatables.
1. Screw one end of the included air hose into the air hose port of your inflator.
2. Take the dust cap off the tire you're inflating (car, bike etc). Screw the
other end of the air hose onto the valve connector on the tire, and ensure it is
properly connected, without overtightening it.
Tire
Inflator
For any inflatables whose valve connector does not fit the air hose, such as
a ball, pool float, etc., install the included valve adapters to the air hose first.
Once connected, plug the air hose with the adapter into the valve connector
of your inflatables.
Valve Adapter
(Included)
Valve connector
of your ball
Step 2. Presettings
1. Setting inflation mode
Turn on the inflator, and press the Mode button
your desired inflation mode. The inflation mode icon and its default pressure
value will show on the screen.
NOTE: If the tire has a Presta valve connec-
tor (French valve connector), then you need
to install a Schrader valve adapter (American
valve adapter) to the valve connector first,
before connecting the air hose.
Air Hose
(Included)
Presta valve connector
Soccer ball
EN 3
Schrader valve adapter
(Included)
Valve Adapter
(Included)
M
repeatedly to select
Balloon