Publicidad
Idiomas disponibles
Idiomas disponibles
8.SETTING AND FUNCTION OF
MENU
MODE
°C/°F
SCAN button
1.Switch on the device
In the switch on state, Press the "SCAN" button,
one second after the screen panel in full display,
it will enter the standby mode with the sign "---
°C" or "----°F".
Then press the "SCAN" button again, you will
get the measuring result in 1 second. But if
there is no more operation, it will turn off in 30
seconds automatically.
2.In the switch on state, Setting the mode
a. Press "MODE" button, and the screen will
display: Body...°C
b. Press again "MODE" button and the screen
will display: Surface
Temp...°C
c. Press again "MODE" button and the screen
will display: Room...°C
Note: The thermometer default is set to
BODY mode.
3.In the switch on state, Press the "°C/ °F" but-
ton to transfer between Celsius and Fahrenheit.
4.In the switch on state, Press "MEM" (Memory)
button, which will then display the last tempe-
rature, and allows for a view of the last 32 mea-
surements.
MEM
Buzzer
www.spengler.fr
Celsius
Temperature
Fahrnheit
Memory
Low battery
29
Publicidad
