Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Adjusting the height of the
1
wood top work surface
□
Please connect with electricity before operation.
□
To raise the work surface, long press the up button to the
desired height or until it reaches it's top.
□
To lower the work surface, long press the down button until
it reaches the desired height or rests back on top of the
rolling cabinet.
□
M1 & M2 is for memorizing the working height. To memorize
the preferable heights as M1 or M2, lift the
to the desired height first then long press M1 or M2 button for
three seconds until the red lights flash 3 times.
When the light turns to be blue, the setting is done.
The setting is re-adjustable per user's request.
NOTE:
When the wood top is lowered to a certain height, it slows
down to prevent pinched hands. And there is still an
interval when fully lowered based on safety considerations.
WARNING: There is no storage in the center tray.
Use front and back trays only for storage. Do not remove items
from trays when the wood top if being raised or lowered.
3
Removing the drawers
□ Fully extend and empty the drawer.
□ On the slide, lift up the plastic release lever on one slide
and push down the plastic release lever on the other slide.
Gently pull the drawer out so the slides can ride over
the stops.
2
work surface
I
4
7
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (I) into the lock (J) and turn
it one quarter turn counterclockwise. Then remove the key.
□ To unlock the unit, insert the key (I) into the lock (J) and
turn it one quarter turn clockwise. Then remove the key.
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
Please contact 1-888-HD-HUSKY for further assistance .
HUSKYTOOLS.COM
Publicidad
