Publicidad
Idiomas disponibles
Idiomas disponibles
If you need to change a filter, make sure that the re-
assembly is properly made; ensure the new filters are not
wet or damp. In this case, wait for it to dry completely.
The unit is suitable for suction of small amounts of liquid
or wet surfaces, if there is liquid in the dust container, do
not overturn the product to prevent water leakage.
CAUTION: while the unit is operating, do not
approach the air inlet to ears, eyes, or to fragile
items such as vases, tools, electronic equipment etc...
Never leave the appliance unattended while it is running.
Always use the operation button to turn on or turn off the
vacuum cleaner.
Do not obstruct the ventilation slots on the product.
In case of overheating, or if the unit produces smoke,
smell or unusual noises, turn it off immediately and check
that the pipe is free from obstacles. If the tube is free,
contact the service center for checking the appliance.
Do not immerse the motor unit in water or other liquids:
clean the appliance with a damp cloth.
To change attachments or perform cleaning and
maintenance operations, switch off the unit.
Regularly clean unit for better performance and durability
If the adapter is broken or got lost, contact an authorized
service center for replacing it.
CAUTION: Pay attention to the specifications of the
adaptor if you have to change it. An incorrect voltage
may damage appliance and shorten the functionality.
DESCRIPTION AP10
1. Working button
5. Suction port
9. Nozzle for liquids
OPERATING THE UNIT
Depending on the type of suction, insert the accessory in the suction port (5), pushing it until it is secure.
Turn the power switch (1) to "1" and start vacuuming. At the end of the operation, bring the power button (1)
to "0" and put the vacuum cleaner and the adapter out of the reach of children.
WARNING: in the case of vacuuming on wet surfaces, always empty the dust container (6) at the end of the
2. Charging light
6. Dust container
10. Nozzle + Brush
3. Main body
4. Charging input
7. Filter
8. Container release button
10
Publicidad
