Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.
Working with the device
IMPORTANT: The device monitors the ambient temperature on its own and, if
necessary, switches itself on and off depending on the set temperature and the
environment in which it is located.
NOTE: the first time the appliance is used, a small amount of smoke may come out,
accompanied by an unpleasant smell - this is normal (the protective agent on the
stainless steel parts is being burnt off) and does not constitute a defect of the
product.
Control panel:
Handling:
Place the device in its desired location.
•
•
Connect the plug to a suitable power source.
•
Set the temperature control knob (in the picture above) to the "MAX"
position and let the unit work at full power, thanks to which the unit will
heat the room more efficiently.
Use the knob on the right to set the blowing power (fan speed) - 3 speed
•
levels to choose from. The unit works if the knob is set to a position other
than "0".
•
If necessary, the temperature can be set to a lower temperature during
operation.
Publicidad
